Contents

Current through Amendment 192-156 of August 21, 2025

Subpart A §§ 192.1-192.18 General
SubPart B §§ 192.51-192.69 Materials
SubPart C §§ 192.101-192.127 Pipe Design
SubPart D §§ 192.141-192.205 Design of Pipeline Components
SubPart E §§ 192.221-192.245 Welding of Steel in Pipelines
SubPart F §§ 192.271-192.287 Joining of Materials Other Than by Welding
SubPart G §§ 192.301-192.329 General Construction Requirements for Transmission Lines and Mains
SubPart H §§ 192.351-192.385 Customer Meters, Service Regulators, and Service Lines
SubPart I §§ 192.451-192.493 Requirements for Corrosion Control
SubPart J §§ 192.501-192.517 Test Requirements
SubPart K §§ 192.551-192.557 Uprating
SubPart L §§ 192.601-192.636 Operations
SubPart M §§ 192.701-192.761 Maintenance
SubPart N §§ 192.801-192.809 Qualification of Pipeline Personnel
Subpart O §§ 192.901-192.951 Gas Transmission Pipeline Integrity Management
Subpart P §§ 192.1001-192.1015 Distribution Integrity Management Program. (DIMP)
Appendix A Reserved
Appendix B Qualification of Pipe and Components
Appendix C Qualification of Welders for Low Stress Level Pipe
Appendix D Criteria for Cathodic Protection and Determination of Measurements
Appendix E Guidance on Determining High Consequence Areas and on Carrying Out Requirements in the Integrity Management Rule
Appendix F Criteria for Conducting Integrity Assessments Using Guided Wave Ultrasonic Testing (GWUT)
Appendix G Guidance on Moderate Consequence Areas
 
  Service Line Drawings
  Jurisdictional LPG Drawings
  OPS Forms at PHMSA website
  Disclaimers

 

Printed version (Microsoft Word)

Printed version (PDF)

 

Authority: 30 U.S.C. 185(w)(3), 49 U.S.C. 5103, 60101 et. seq., and 49 CFR 1.97.

Source: 35 FR 13257, Aug. 19, 1970, unless otherwise noted.